CJ6 Electrically Operated Mechanism
The mechanism is used to operate the main isolation and earthing switch of the RGP-SVEL-110 high-voltage disconnector. This mechanism is an electric mechanism, and the mechanism has two operation modes: manual and electric at the same time. Through the forward and reverse rotation function of the reducer motor, this mechanism uses a magnetic blowing switch to ensure the opening and closing position and output angle, and can fine-tune the output angle through the magnetic blowing switch.
Technical Parameters
1. The output angle of this mechanism is ±182° (can be customized according to user requirements).
2. Output torque: 900N.m.
3. Rated voltage dividing and closing time≤ 12S.
4. Use CSK type magnetic blow switch. The current that can be continuously passed through the contact is 10A at AC220V and 3A at DC220V.
5. Use F9-24I/L type auxiliary switch.
6. The secondary connector is the terminal strip mode.
7. Technical parameters of reducer motor
|
Model |
NMRV+NMRV 050-090-AC/NMRV+NMRV 050-090-DC |
|
Rated operating voltage |
AC 380V/DC 220V |
|
Rated output power of the motor |
750W/550W |
|
Normal operating voltage range |
85%-110% |
Diagram
Engineering Drawings
Ordering instructions
1. Control voltage and motor voltage;
2. an output angle;
3. Installation size;
4. Outdoor or indoor use;
5. The output mode of the output shaft;
6. The starting position (angle) of the output shaft when the opening position is opened;
7. The logarithm of the auxiliary contact of the auxiliary switch;
